A new way of controlling model railroads by modelers for modelers.
project is developing an easy but sophisticated network for model
railroad control using today's technology.
It is the
basis for NMRAnet / S-9.7 Standard bus.
website describes OpenLCB, a developing Local Control Bus (LCB) used
to control model railroad accessories. It is designed
to make set-up of simple and complex layouts easier. It is not meant
to replace DCC, but rather work along side it. It makes your operator
consoles, CTCs, and accessories more effective by bringing everything
together into one system. Your investment in DCC, CTC, signals and
turnouts is protected. Cabling and connection is simple and low cost
--- and usually pre-made but can be DIY assembled needed. Bus wiring
consists of a single network cable and a single power supply cable.
Configuration is simple and easy to manage.
see how this works, look at the second video on this
– which shows how things are actually programmed. The third video
shows some more-complex programming. You can re-use things you have,
like signals, BOD's, turnouts, train ID sensors, RFID, structure
lighting and the like, but connect them in ways you never thought
possible, to achieve full prototypical accuracy and detail. Add
complex new technology easily, such as sound effects, TV in
structures, timetable signs in stations, outdoor video displays,
structure lighting fully controlled and much more as time goes on.
Hopefully different manufacturers will support a common standard and
so the range of products available will grow.
Follow our Progress
From small ...
... to huge,
will help you do
want to do most:
run your railroad.
is Easy to use: Whether
you want to do simple setup by just pushing buttons on boards, or use
a full-featured configuration tool, OpenLCB makes setup easy.
protects your investment:
From your first
two boards through huge modular layouts, OpenLCB equipment will grow
with your railroad, and you can still connect and use your legacy
is simple to expand:
equipment can be added without
ID conflicts, without
keeping track of
complicated address assignments, and never being forced to go back
and reconfigure equipment – all while working with your existing
All the DevKits
allocated. We are contemplating another promotion, and would
appreciate suggestions. For those that missed the DevKit, you can
assemble your own by obtaining the parts from RailStars.com and
TCHTechnology.com. Please contact the egroup, or
for more information. Thanks for your support!
The first two documents of the NMRAnet Standards Suite were formally
accepted by the NMRA Board at the annual NMRA meeting, this year in
available and shipping is starting. The cost (co-pay) is $50 +
shipping. Please contact email@example.com
for more information, or to apply for one.
is in active development. The NMRA will purchase some of these for
development / demonstration of NMRAnet.
its July 2011 meeting, the NMRA Board decided to proceed with NMRAnet
/ S-9.7 based on OpenLCB designs.
OpenLCB group did two
OpenLCB clinics at the NMRA 2011
convention in Sacramento. We've posted the slides
from the clinics if you couldn't be there. We've also got a page
of movies, photos and diagrams from the day's worth of
demonstrations we did at the NMRA 2010 convention in Milwaukee.
of a prototype OpenLCB throttle available on YouTube.
us on Twitter! It's the
easiest way to hear about OpenLCB advances as they happen.
out the videos on our OpenLCB
YouTube channel. See demonstrations that are almost as good as
What we're doing:
OpenLCB is being developed through an
open, community based process. You can follow our
documents as they develop, check out our prototype code, and if you
want to take part.
Welcome to the project! We all benefit
by working on this together. Questions and comment can be directed to
the egroup: OpenLCB
How to get
prototype hardware is based on:
* the AVR-based Arduino
platform at Hobbyists,
a ATMega328-based compatible from Silicon Railway;
Shield from SPCoast;
Developer's Board, an AT90CAN -based compatible from Railstars,
an Arduino-compatible AT90CAN-based board also from Railstars
as a platform for a throttle and a command station, and its
a library for a Command Station, from Railstars;
* the new DevKit
from Railstars / NMRA.
* PIC code based on the CBUS platforms
is a CAN-based layout control bus being developed by MERG.
The NMRA has an effort to create an
“NMRAnet” layout control bus standard. OpenLCB is being proposed
for that. Currently, the NMRA is focusing the NMRAnet discussions on
a common standard for CAN physical layers. For more information on
OpenLCBs work on NMRAnet, our NMRA
Past discussions have taken place on
and MRRLCB Yahoo
This web sites contains trademarks and
copyrighted information. Please see the Licensing
Site hosted by
This is SVN $Revision: 2811 $